Physical

Weight:
13.5 ounces (with batteries).

Size:
2.5 W x 6.5 H x 1.24 D inches
(63.5 W x 165 H x 31.5 D mm).

Operating Temperature:
-14° to 140°F (-10° to 60°C).

Keyboard:
Membrane switch with twelve tactile keys.

Case:
Extruded aluminum body
with nickel-plated aluminum
end caps (gasket sealed).

Data Output:
Bi-directional RS232 serial port. Windows® PC interface software.

Display:
1/8 in. VGA grayscale display
(240 x 160 pixels). Viewable area 2.4 x 1.8 in. (62 x 45.7mm).
EL backlit (on/off/auto).

Ultrasonic Specifications

Measurement Modes:
Coating Off: Pulse-Echo (P-E)
Coating On: Pulse-Echo Coating (PECT)
Temp Comp: Pulse-Echo (PETP)
Thru-Paint: Echo-Echo (E-E)
Thru-Paint Verify: Echo-Echo Verify (E-EV)
Coating Only: Coating (CT)

Pulser:
Dual square wave pulsers.

Receiver:
Dual receivers - manual or AGC gain control with 110dB range (limited).

Timing:
25 MHz TCXO with single shot 100 MHz 8 bit ultra low power digitizer.

Power Source

Three 1.5V alkaline or 1.2V NiCad AA cells.

Typically operates for 150 hours on
alkaline and 100 hours on NiCad
(charger not included.)

Auto power off if idle 5 min.

Battery status icon.

Measuring

Range:

Pulse-Echo Mode (P-E): (Pit&Flaw Detection) measures from
0.025 19.999 inches (0.63 to 500 millimeters).

Pulse-Echo Coating Mode (PECT): (Material, Coating, Pit & Flaw Detection): Material: 0.025 to 19.999 inches (0.63 to 500 millimeters). Coating: 0.001 to 0.100 inches (0.01 to 2.54 millimeters).

Pulse-Echo Temp Comp Mode (PETP): (Pit&Flaw Detection) Auto temperature compensation - measures from 0.025 19.999 inches (0.63 to 500 millimeters).

Echo-Echo Mode (E-E): Thru Paint &
Coatings) measures from 0.100 to 4.0
inches (2.54 to 102 millimeters).
Range will vary +/- depending on the
coating.

Echo-Echo Mode (E-EV): Thru Paint &
Coatings) measures from 0.050 to 1.0
inches (1.27 to 25.4 millimeters).
Will vary based on coating.

Coating Only Mode (CT): (Coating Thickness) Measures from 0.0005 to 0.100 inches (0.0127 to 2.54 millimeters). Range will vary +/- depending on the coating.

Resolution: +/- .001 inches (0.01 mm)

Velocity Range:
.0492 to .5510 in./ms 1250 to 13995 meters/sec

Calibration: Single and Two point calibration option for material & coating, or selection of basic material types.

Units: English & Metric

Display

Display Views:

Large Digits Standard thickness
view. Digit Height: 0.700 in (17.78 mm).

A-Scan - RF (full waveform) & +/- Rectified (flaw view).

B-Scan - Time based cross section view.
Display speed of 15 secs per screen.

Scan Bar 6 readings per second. Viewable in B-Scan and Large Digit views.

Repeatability Bar Graph Bar graph
indicates stability of reading.

Feature Status Bar - Indicates features currently active.

Data Logger (Internal)

Log Formats:

Grid (alphanumeric)
Sequential (auto identifier)

Cell Contents:

Graphics On: 16.000 readings, B-Scan image & gauge settings for every reading.

Graphics Off: 210,000 readings (coating, material, min & max)

OBSTRUCT to indicate inaccessible locations.

Memory: 32 megabit non-volitile ram.

Transducer

Transducer Types:
Dual Element (1 to 10 MHz).

Locking quick disconnect “ 00” LEMO connectors.

Standard 4 foot cable.

Custom transducers and cable lengths available for special
applications.

Features

Setups:
64 custom user-definable setups.
Factory setups can also be edited by
the user.

Gates:
Single gate in pulse-echo mode, or single gate with holdoff in echo-echo mode. Adjustable threshold.

Selectable Transducers:
Selectable transducer types with built-in dual path error correction for
improved linearity.

Alarm Mode:
Set hi and lo tolerances with
audible beeper and visual LEDs.

Fast-Scan Mode:
Takes 32 readings per second and
displays the minimum reading found when the transducer is removed.

Flaw Mode:
Basic Prove-up flaw detection option using single element angle beam transducers.


Certification

Factory calibration:

traceable to national standards.

Warranty

2 year limited