|
Physical
Weight: 10
ounces
Size:
2.5 W x 4.75 H x 1.25 D inches (63.5 W 120.7 H x
31.8 D mm)
Operating
Temperature:
-20° to 120° F (-30° to 50° C)
Case:
Extruded aluminum body / nickel plated aluminum end caps.
Resistant to impact and environmentally sealed.
Keypad
Sealed membrane that is resistant to both water and petroleum products.
Nine tactile-feedback keys.
Transducer
Dual element (transmit and receive).
1
to 10 MHz frequency range
Locking quick disconnect LEMO connectors.
4 foot cable.
Optional cable lengths up to 100 feet.
Custom
transducers available for special
applications.
|
Power
Source
Two
1.5V alkaline or 1.2V NiCad AA cells
Typically
operates for 200 hours on alkaline and
130 hours on NiCad.
Display
flashes when battery is low. Unit turns off automatically
when battery is too low to operate reliably.
Display
Multi-function
4.5 digit liquid
crystal display with 0.500 inch numerals, backlit for use in poor light
conditions.
Backlight
is selectable:
on / off / auto ( illuminates only when taking a
measurement ).
Measurements
displayed in inches, inches/microsecond. millimeters,
and mters/second.
Bar
graph indicates stability of reading.
Certification
Factory calibration traceable to national standards.
Warranty
5
year limited
|
Measuring
Range:
Measures from 0.025 to 19.999 inches (0.63 to 500 millimeters).
Switch to select English or metric units.
Resolution:
0.001 inches (0.01 millimeters)
Velocity
Range:
.0492 to .3937 in/m s
1250 to 10,000 meters/sec
Built
in:
Stainless steel reference disk for probe zeroing.
Four
readings per second for single point measure ments
or 16 per second in scan mode – captures the minimum
thickness.
Single
and Two point calibration option included.
Features:
Differential Mode: Enter acceptable thickness value, unit will display
+/- the difference from the value entered.
Alarm
Mode:
Enter a minimum acceptable thickness value. If measurement falls
below minimum, red led will illuminate and sound beeper. If measurement
is above minimum value, green led will illuminate.
Data
Ouput:
RS232 output sends thickness readings to a computer or other
external storage device.
|
