The MX-1 a our most basic model. This gauge can be pre-programmed for a specific material type using a simple PC program. The MX-1 is an excellent choice for users that measure the same material type all the time, and do not have the need to re-calibrate to different materials on the fly.
Note: The material velocity must be known prior to programming.

The MX-2 has 8 common preset material types and 2 user programmable types. This makes the MX-2 a little more flexable for those users that have a need to meausre more than material type. Our simple PC program allows the user to program the MX-2 for two additional set material types.
Note: The material velocity must be known prior to programming.

The MX-3 is the first model in the MX line with the abiltiy to field calibrate on the fly. This model offers extreme flexabilty and accuracy to calibrate to a variety of materials instantly. Simply tell the MX-3 one known thickness point located on the test material, and the MX-3 will calculate the material type for you. The MX-3 is also equiped with a two point calibration option, providing the user with extreme accuracy. Another special feature of the MX-3 is the high speed scan mode. In this mode, the MX-3 takes 16 readings per second rather than 4 readings per second in standard measurement mode. The readings are viewable while scanning. Simply remove the transducer from the area being tested and the MX-3 will display the minimum thickness in the area scanned.

The MX-5 has all the features of the MX-3 plus: An audible and visual alarm mode. In alarm mode, the user can set a nominal thickness value. When measurements fall above or below the set nominal value, a red light and audible beeper is displayed and sounded. The MX-5 also features a differential mode. In differential mode, the user sets a target thickness value and the MX-5 will display the difference ( +/- ) from the target value. The MX-5 is also equiped with an RS232 port out. This enables the user the ability to send measurements to an external data collection device or directly to a PC.

The MX-5DL has all the features of the MX-5 plus: An Internal data logger that stores a total of 1000 readings in 10 files of 100 readings each file. This gives the user the ability to store, and download the stored measurements directly to a PC using our DakView software program. The software and transfer cable are included in the MX-5DL kit.

The VX is our velocity gauge.  This gauge has the ability to determine the velocity of materials by calibrating to a known material thickness.   The VX is typically used to verify material consistency, or determine a test material type.

The MMX-6 is a Multi-Mode thickness gauge that has the ability to measure through painted or coated surfaces and eliminate the thickness of the paint using a dual element style transducer in echo-echo mode. The MMX-6 can also effectively find pits and flaws with the press of a single button. The MMX-6 has all the features of the MX-3 plus: An audible and visual alarm mode. In alarm mode, the user can set a nominal thickness value. When measurements fall above or below the set nominal value, a red light and audible beeper is displayed and sounded. The MMX-6 is also equiped with an RS232 port out. This enables the user the ability to send measurements to an external data collection device or directly to a PC.

The MMX-6DL has all the features of the MMX-6 plus: An Internal data logger that stores a total of 1000 readings in 10 files of 100 readings each file. This gives the user the ability to store, and download the stored measurements directly to a PC using our DakView software program. The software and transfer cable are included in the MMX-6DL kit.

The MMX-7 has all features of the MX & MMX gauges with some additional features and advantages. Selectable Large Digits and B-Scan display options. An Internal data logger that stores a total of 12,000 readings and waveforems, 64 user custom definable setups, selectable transducer table for improved linearity, thru paint mode with the single press of a button, multiple calibration and material selection options, and selectable low, med, or high gain options. This is all nicely packaged in a very mini portable aluminum extrusion for extra durability, not to metion, portability! The MVX/PVXview or java based PC software makes this thing a complete kit, and then some!

The MVX finishes the line of MX gauges with class. This thing is loaded with all of the features of the MX gauges and a lot more. Four selectable display options (RF, Rectified, B-Scan, and Large Digits). An Internal data logger that stores a total of 12,000 readings and waveforems, 64 user custom definable setups, selectable transducer table for improved linearity, thru paint mode with the single press of a button, multiple calibration and material selection options, and auto waveform find - just to mention a few! Equipped with a single element flaw prove-up mode for basic angle beam inspections. This is all nicely packaged in a very mini portable aluminum extrusion for extra durability, not to metion, portability! The MVXview java based PC software makes this thing a complete kit, and then some!

The The CMX has all features of the MX & MMX gauges with a ton of advanced features. Measure material and coating thickness simultaneously, while still detecting pits & flaws in a single mode (PECT). Auto probe zero, auto probe recognition, auto temperature compentsation, have also added into the mix. Selectable Large Digits and B-Scan display options. Up to 64 custom user definable setups, selectable transducer table for precision linearity, and material and coating calibration options are also available. Our standard thru paint mode is is still included and ongoing. Switch between modes, according the transducer recognized or manually selected. 5 position 10dB gain switch, Allows the user to adjust to certain material types and be successful with common, but difficult, applicaton senarios. This gauge is really loaded with a ton of features and added benefits. It's all very nicely packaged in a very small portable aluminum extrusion for extra durability. Our DakView Java based PC software is also included, making the kit more than complete.

The The CMX DL has all the features of the CMX, plus a huge storage capacity, using multiple file structures. Select between to file formats: Sequential, with auto identifiers or, our standard alpha numeric grid format. The storage capacity is rather impressive. Graphics on: Store 16,000 + readings (material & Coating) with a B-Scan, and all features and gauges settings per reading. Graphics off: Store 210,000+ readings, including material, coating, and min & max readings. Massive storage capacity! The kit includes our DakView java based PC software, for transfering and reporting purposes.

The The CMX DL+ has all the features of the CMX DL, plus a full featured A-Scan presentation with RF and Rectified viewing options. The CMX DL+ is equipped with 3 fully adjustable gates (start, stop, width, & Threshold). Equipped with a 20dB boost/cut attenuator, which offers added flexibility for transducer types and applications. Selectable 50 volt pulser boost or cut (100 - 200 volts). Truly the cadillac of the CMX series.

The PX-7 is our basic precision gauge model.  The PX series are packaged in an aluminum extruded body,  with nickel plated aluminum end caps.  The PX series gauges are typically used for thin material applications. This gauge has the ability to calibrate to a variety of different materials using a one point calibration option.  Some of the features include:   Scan feature (allowing the user to scan an area for the minimum thickness),   alarm mode (audible & visual), differential mode (+/- from nominal thickness value), and RS232 port out.

The PX-7DL has all the features of the PX-7 plus  a data logger that stores a total of 1000 readings in 10 files of 100 readings each file.  Complete with file transfer software.

The PVX finishes the line of PX gauges with class. This thing is loaded with all of the features of the PX gauges and a lot more. Four selectable display options (RF, Rectified, B-Scan, and Large Digits). An Internal data logger that stores a total of 12,000 readings and waveforems, 64 user custom definable setups, selectable transducer table for improved linearity, multiple modes with the single press of a button, multiple calibration and material selection options, and auto waveform find - just to mention a few! This is all nicely packaged in a very mini portable aluminum extrusion for extra durability, not to metion, portability! The PVXview java based PC software makes this thing a complete kit, and then some!

The The PR-82 has been tuned specifically for racing applications. The engine builders use this gauge to check for core shift in engine blocks prior to boring, deck thickness, and when porting heads. The chasis builders and sanctioning bodies use the PR-82 for determining tube thickness.

This our latest addition to the racing gauge product line. The PR-8V offers a great deal of additional high end features for racing applications. Two selectable display options (B-Scan and Large Digits). The internal data logger is stetup for mapping engine blocks and making general chassis inspections. stores a total of 12,000 readings and B-Scans, 64 user custom definable setups, selectable transducer table for improved linearity, thru paint mode with the single press of a button, multiple calibration and material selection options. The PR-8Vsonicview engine mapping software is included with the PR-8V, and provides the racers with all the reporting requirements needed.

Take your MX-3 underwater with you for inspections! The UMX is an underwater enclosure specifically designed for offshore inspection purposes. Rated to 300 feet underwater. The nice part about this accessory enclosure is the ability to remove the MX-3 and use it, very conveniently, for other "Above Water" applications.